Fluorosilicone Diaphragms.

Cannon Gasket has the Capability to produce high strength, tear resistant diaphragms for your most critical and demanding applications. Diaphragms are commonly used in high pressure applications where the material must be flexible yet durable enough to withstand repeated flexing over a long period of time. Materials are integrated with reinforcing fabrics to improve application performance and durability, along with Capabilities to maintain responsiveness to variations in pressure. Common Diaphragm Fabrics include; Nylon, Dacron® / Polyester, Nomex®, Kevlar®, Fiberglass, Silk and Cotton. Fluorosilicone (FVMQ) pairs the fuel and oil resistance of fluoroelastomers with the wide temperature flexibility of silicone, so the diaphragm keeps responding through extreme hot and cold swings that would stiffen a standard fuel-resistant rubber.

Request a Quote909.355.1547
Fluorosilicone diaphragms, die-cut close-up
Get pricing

Request a quote for Fluorosilicone diaphragms.

Properties of Fluorosilicone diaphragms

Cannon Gasket cuts Fluorosilicone diaphragms to your exact specifications. Fluorosilicone exhibits excellent resistance to jet fuel, gasoline, oils, aromatic and chlorinated solvents, ozone, and oxidizing chemicals, while retaining flexibility across extreme temperature swings.

Fluorosilicone tolerances and customization

Standard dimensional tolerances on Fluorosilicone diaphragms land around ±0.010" to ±0.015" on OD and ID, depending on material thickness and profile. Tighter tolerances are available on selected grades. Cannon Gasket cuts Fluorosilicone to custom profiles in-house and matches lead times to your production volume. PSA backing, pad printing, custom packaging, and kitting are all on the menu when you need them.

How Fluorosilicone Performs

That combination makes fluorosilicone the material of choice for aerospace fuel-system and avionics diaphragms, where a pressure-sensing membrane has to flex reliably across the full flight envelope while contacting jet fuel, additives, and aromatic solvents. Each diaphragm is produced to your geometry, durometer, and convolution profile for consistent stroke and long cycle life.

Where Fluorosilicone Diaphragms Are Specified

- Aerospace fuel-system diaphragms - Avionics pressure-sensing diaphragms - Fuel pump and metering diaphragms - Fuel pressure regulator diaphragms - Pneumatic actuator diaphragms - Fuel-system control valve diaphragms

Manufacturing Methods

Die-Cut and Flash Cutting available

Request a QuoteFluorosilicone Diaphragms
Key Properties
  • Fuel & oil resistant
  • Solvent resistant
  • Aerospace & mil-spec
Engineering Tools
Applications
Ready to quote?
Submit your drawing or specifications and we'll respond with pricing and lead times.
Request a Quote
or call 909.355.1547
Keep Exploring

Related products, materials & reading.

Material
Silicone Diaphragms
Custom die-cut silicone diaphragms with wide temp range -50F to 500F and excellent flex life.
Material
EPDM Diaphragms
Custom die-cut EPDM diaphragms with superior weather, ozone, water, and steam resistance.
Product
Custom Die-Cut Gaskets
Same elastomers, die-cut to your gasket drawing specifications.
Capability
Custom Gaskets
Materials and fabrication capabilities behind every custom part we cut.
Frequently Asked Questions

Common Fluorosilicone diaphragm questions.

Are you ISO 9001 certified?
Yes, ISO 9001:2015 certified. Documented quality management covers incoming material verification, in-process inspection, calibrated measurement, final inspection, non-conformance handling, corrective action, and full lot traceability. AS9100-ready for aerospace, with MIL-spec and FDA 21 CFR 177.2600 / USP Class VI grades available on request.
Do you supply fabric-reinforced diaphragms?
Yes. Nylon or polyester fabric embedded in the elastomer adds tensile strength for high-pressure service. Common for hydraulic and pneumatic actuator applications above 100 psi.
What applications use custom diaphragms?
Diaphragm pumps, pressure regulators, pneumatic actuators, control valves, medical devices (ventilators, dialysis, infusion pumps), and pneumatic logic controls. We cut the diaphragm blank to your drawing in any of the stocked compounds.
Which materials are used for custom diaphragms?
Silicone for wide temperature and FDA grades, EPDM for weather and steam, Nitrile / Buna-N for fuel and oil pumps, Viton for aggressive chemicals, Fluorosilicone for aerospace fuel systems, and fabric-reinforced rubber for high-pressure applications.
How fast do you return a quote?
Most RFQs come back within one business day. Simple profile updates to an existing tool quote same-day. Send a drawing, DXF, or competing part number and our engineering team reviews material, tolerance, and volume before pricing.
What is the minimum order quantity?
Minimums depend on the part and material. We cut prototype and first-article quantities for engineering evaluation, then scale up to production volumes from the same tooling. For high-volume programs we run JIT, VMI, and Kanban replenishment out of Fontana, California.
What should I send with an RFQ?
Ideal: a drawing or DXF, material spec (or compound family), estimated annual volume, and any regulatory callouts (FDA, USP Class VI, AS9100, MIL-spec). If you only have a sample or a part number from a competing supplier, send that and we will reverse-engineer the spec before quoting.
What are typical lead times?
Prototype and first-article parts usually ship in 5-10 business days. Production runs from existing tooling are 2-3 weeks depending on volume and material lead time. Rush and expedite options available on a case-by-case basis.
Need custom Fluorosilicone diaphragms?
From prototype to production, any size, any volume.
Request a QuoteContact Us
ISO 9001 CertifiedAS9100-ReadyMIL-Spec CompatibleFDA / USP Class VIEst. 1971ISO 9001 CertifiedAS9100-ReadyMIL-Spec CompatibleFDA / USP Class VIEst. 1971ISO 9001 CertifiedAS9100-ReadyMIL-Spec CompatibleFDA / USP Class VIEst. 1971ISO 9001 CertifiedAS9100-ReadyMIL-Spec CompatibleFDA / USP Class VIEst. 1971